Warning: session_register() expects at least 1 parameter, 0 given in /home/tiptopwe/public_html/sub-articles.tiptopweb.info/article.php on line 35
Blocked Showers And How To Clear Them!

Google
TipTop Business Web Directories - Add  your sites link starting at £1


Home | Business | Ask An Expert


Blocked Showers And How To Clear Them!

By: Kane Ashley

The very first visual sign of a blocked shower is a reduced quantity of water coming out of the shower head. Another sign is indiscriminate spurts of water going in abnormal directions. These signs can only suggest one thing - you have got a partially blocked shower. But before you jump in and change your shower head, it is best to find out what caused it so it won't happen again. Likewise, you need to know how to clear those clogs without spending too much cash.

Common causes of blocked showers:
If you have a newly built home, then the odds are the debris from the construction is the cause of your blocked shower. Small pieces of plastic, pipe shavings, and bits of wood left by workers may find their way to the shower which will eventually cause it to become clogged. The pipelines should have been flushed with water before the nozzle was fixed.

Hard water is usually the kind of water supplied in most cities. This kind of water leaves bits of residue and mineral deposits in the shower head's faceplate. These sediments can block the small holes of your shower, thereby reducing the water flow.

Molds and bacteria thrive in places where there is moisture. A shower head or a water pipeline for that matter is a very good area for them to thrive and multiply. They build up on the faceplate over a period of time which creates the blockage.

How to clear the blockage:
When you are sure that you have a blocked shower, then it is time to take out the things blocking it. The first thing to do is to gather all of the tools that you will require for clearing your shower. The tools needed are: distilled white vinegar, denture tablets, scrub brush, and a big bowl. Next, remove the showerhead using a wrench. Pour the vinegar into the basin and immerse the showerhead. Leave it for a few hours. For stubborn mineral deposits, warm the vinegar prior to soaking the showerhead.

After several hours, remove the showerhead from the bowl of vinegar. Get your scrub brush and then scrub the showerhead to get rid of your sediments. Rinse it with water. Dissolve some denture tablets in hot water. Pour the mixture into a container and add the showerhead into it. Soak it again for several hours. Remove the showerhead and then scrub off the remaining sediments from the showerhead. Finally, rinse it with water.

After you have carried out all of these steps, you ought to possess a showerhead that is virtually new. There are, however, some preventative options to problems associated with blocked showers. One is to use a soft water system which removes the minerals from hard water. You need to consider the price as it is an expensive solution.

An alternative choice is to purchase a self-cleaning shower head and replace your old one. These kinds of shower heads have plungers that wipe the faceplate every time the head is adjusted to a different positions. These small plungers prevent the build up of sediments on the shower head. Always remember that routine maintenance will keep your shower in immaculate condition without loss in water pressure.

Article Source: http://articles.tiptopweb.info

I do have a go at most jobs around the home, but one of the DIY jobs I hate doing is plumbing and heating. If you don't know exactly what you are doing then you can end up making the problem a lot worse for yourself. I find it a lot easier to get a porfessional in. It usually works out cheaper in the long run.

Please Rate this Article



 

Not yet Rated

Click the XML Icon Above to Receive Ask an Expert Articles Via RSS!

© 2006-2008 Articles.TipTopWeb.Info . All Rights Reserved.
Use of our service is protected by our Privacy Policy and Terms of Service

Powered by Article Dashboard